Decide what you’ll drill or fasten before committing to a cordless tool kit.
| Job | Start with | Check on a scrap |
|---|---|---|
| Pilot hole | Drill driver and specified drill bit | Hole position and depth |
| Small screw in softwood | Drill driver with the clutch engaged | Does the head stop flush? |
| Long construction screw | Impact driver with impact-rated bit | Does the bit stay seated under load? |
Write down the first three jobs
For drilling pilot holes and assembling furniture, look for a drill driver with a drill chuck and an adjustable clutch. An impact driver’s compact body and impact mechanism are useful when driving long screws.
Check the bit and battery fit
Drill chucks accept a range of bit shanks. Many impact drivers take quarter-inch hex bits, and bits used with them should be impact rated. Confirm which batteries and chargers the kit includes.
Compare complete kits
A bare tool needs a compatible battery and charger. Compare total costs and hold the tool with the battery fitted if you can. For work inside cabinets, measure the clearance with the bit in place.
Match each tool to a real job
For flat-pack furniture, start with the drill driver and use the clutch setting to control how far the screw seats. For a run of longer construction screws, an impact driver can make repetitive fastening easier. For pilot holes, pair the drill with the bit size recommended by the fastener manufacturer.
What to check in the box
Write down the chuck type, included batteries, charger, and bits before comparing kit prices. Measure from the back of the tool to the end of the installed bit if you need to work inside a cabinet. Use eye protection and remove the battery before changing accessories according to the manual.
Set up a fair side-by-side check
Clamp a scrap of the same material as the project, then mark several positions away from the edge. Use identical fasteners for each run and follow their pilot-hole guidance. Compare seating depth, bit slip and control before looking at speed. Wear eye protection and follow each tool manual.
Read the kit label before comparing prices
The DCK240C2 pairs the DCD771 drill driver and DCF885 impact driver with two batteries and a charger. The drill accepts round-shank bits within its chuck range. The impact uses a quarter-inch hex holder. Check the bit shank and battery platform before buying any extra accessories.
What to look for
Compare the model numbers and fit details before ordering. Product photos are from product catalogs and retailer listings.
DEWALT DCK240C2 Drill and Impact Driver Kit
Compare a half-inch drill chuck and a quarter-inch hex impact chuck in one kit. The manufacturer lists two batteries and a charger.
View on Amazon